euspen 17^th International Conference & Exhibition 29^th May – 2^nd June 2017,
Hannover Congress Centre, Hannover, Germany

SPIE 2017, Conference OP311, Advances in Metrology for X-Ray and EUV Optics VII,
San Diego Convention Center, San Diego, California, United States, 6 - 10 August 2017

MacroScale 2017 will take place from
October 17^th to 19^th, 2017 at VTT MIKES in Espoo, Finland.

Project Coordinator, Dr. Tanfer Yandayan gave presentation on the results of the project in EURAMET TC-Length: EMRP / EMPIR open workshop, 9 October 2016 at VSL, Delft (The Netherlands).

INRIM hosted 6th (CLOSING) meeting of SIB58 Angles in Turin, Italy, 30-31 August 2016 Project closing meeting of SIB58 Angles was held in INRIM in Turin, Italy, 30-31 August 2016.
SIB58 Project partner, INRIM, hosted the event. SIB58 project partners presented their final results for the project. The further dissemination of the project will be performed through journals, conferences and workshops. These information will be available in the website. JRP coordinator, Dr. Tanfer Yandayan, thanked to the participants for their cooperative work and efforts.

Two EURAMET Guides : "Calibration of Autocollimators" and "Calibration of Angle Encoders" have been prepared in SIB58 Angles project and will be available soon in EURAMET website Keep observing, EURAMET Website - EURAMET CALIBRATION GUIDES AND TECHNICAL GUIDES...

Optical component available as commercial product Aperture centring device tested as part of SIB58 Angles project now available as a commercial product

SIB58 Angles Project partners, Dr. Ralf Geckeler (PTB) and Dr. Frank Siewert (REG(HZB)) attended to Tte 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies 26 - 29 Apr 2016, as invited speakers. They have given presentations on Angle Metrology and Advances in Metrology for X-Ray and EUV Optics VII and covered the project outcomes during their presentation.

MWO hosted 5th meeting of SIB58 Angles in Wedel, Germany, 17-18 March 2016. 5th meeting of SIB58 Angles was held in MÖLLER-WEDEL OPTICAL (MWO) in Wedel, Germany, 17-18 March 2016. SIB58 Project partner MWO hosted the event. SIB58 project partners have visited the state of the art angle metrology equipment manufacturer MWO premises and had fruitful discussions on their products. You may click here to reach the website of the MÖLLER-WEDEL OPTICAL (MWO)

Project Workshop : "Current state of the art in Angle Metrology" was held in CEM, Tres Cantos, Spain. 28 October 2015 following 2015 EURAMET TC-L meeting. Click here to get further information.

SIB58 Project partners gave 5 presentations in International Workshop on X-ray Mirror Design, Fabrication and Metrology (IWXM 2015), Lawrence Berkeley National Laboratory, Advanced Light Source on July 13-16, 2015 as a satellite meeting of SRI 2015.

Position reports describing the current state of the art in Angle Metrology are available.

Presentation for the SIB58 project and the first results were given in 2^nd MacroScale Conference, Recent Developments in Traceable Dimensional Measurements, 28^th to 30^th October 2014, Bundesamt für Eich- und Vermessungswesen (BEV) in Vienna, Austria.

Meeting with Stakeholders during Macroscale 2014 at BEV (29 October 2014, Wien, Austria). Stakeholders Committee meeting was conducted during Macroscale 2014 at BEV (29 October 2014, Wien, Austria).
Project coordinator and some partners attend the meeting and report about project and its progress. Discussion was carried out for needs and how to disseminate the project results. One outcome is the distribution of the “Position reports for current state of the art in Angle Metrology”.

Presentation of some work in “Angle Metrology” project during 11th IMEKO Symposium, Laser Metrology for Precision Measurement and Inspection in Industry. (LMPMI), 02.-05. Sept. 2014, Tsukuba, Japan
By Tsukasa Watanabe, Yohan Kondo and Hiroyuki Fujimoto, “Evaluation of dynamic spindle run out ability of self-calibratable rotary encoder”,
By Youichi Bitou and Yohan Kondo, “Scanning deflectometric profiler with small beam size using a commercially available autocollimator”,
By Ralf D. Geckeler, Michael Krause, Andreas Just, Oliver Kranz, and Harald Bosse, “New Frontiers in Angle Metrology at the PTB”.

Project coordinator and REG met synchrotron community. Invited talk for the SIB58 project and the first results were given in Advances in Metrology for X-Ray and EUV Optics V, 17 August 2014, San Diego, California, USA
By Tanfer Yandayan, Ralf Geckeler, and Frank Siewert, “Pushing the limits - latest developments in angle metrology for the inspection of ultra-precise synchrotron optics” Proc. SPIE 9206, Advances in Metrology for X-Ray and EUV Optics V, 92060F (September 5, 2014); doi:10.1117/12.2060953

Presentation of “Angle Metrology” project was made in EURAMET TC-L open workshop on EMRP/EMPIR 21^st - 22^nd October 2013, Braunschweig, Germany